Common mistakes when installing wireless CCTV Cameras

The market today is filled with a range of wireless security cameras, and most residential units or commercial spaces make use of them. The biggest advantage of installing wireless CCTV cameras is that they’re wireless. There are no long-running wires to bother about and that, in itself, eases the installation process.

However, that does not mean installation mistakes won’t be made. Several things can still go wrong. This is due to the plug and plays nature of wireless CCTV cameras.

But these mistakes can be avoided by being informed. So, here is a list of common wireless CCTV camera mistakes often made during installation.

Improper Positioning

The right kind of wireless CCTV camera installation involves proper positioning. You want to make sure that the camera records from all the right angles. This means not getting the camera to point to the ground or exposing it to too much light. This can result in absolutely useless footage.

Again, since dealing with wireless security cameras, it is necessary to ensure proper Wi-Fi connectivity. If you end up placing the camera in a remote location, it likely will not function due to connection issues. So, ensure there aren’t any problems with connectivity. Check for connectivity issues by carrying out a Wi-FI speed test.

A range extender might come in handy during such situations.

Going Completely Wireless

The benefit with wireless security cameras is that you don’t need an ethernet or router. However, you will need wires to run the cameras. Several options run on batteries. But switching batteries now and then can be a problem if the cameras are positioned high.

This is when you’ll need a permanent fixture to solve the problem. So, choose a spot that has the option of inserting electrical plugs.

Not Installing Enough Wireless CCTV Cameras

Another common mistake with wireless CCTV camera installation is not installing enough cameras. If you have a large property, you will need more than just to cameras to monitor things. You need a complete view of the property. Only then can you enjoy full security.

Of course, this rule does not apply to smaller homes. For instance, if you live in a suburban home and your only need is to monitor people at your door, a single camera is okay. However, if you have commercial space to worry about or a large piece of property, make sure you’re installing at least 3 to 4 cameras.

Install these cameras on the grounds and also the various access points. Make sure you look for blind-spots and add cameras wherever you spot them.

Forgetting the Password

Passwords have become a dominant factor, and with wireless CCTV cameras, things only get worse. You’re going to have to add more passwords to your list. To be more specific, two passwords.

If you need extra security, you’re going to have to choose a camera that requires the user to enter a specific key for access while things are being set up. See if you can choose something with double encryption.

In general, wireless security cameras come with pre-configured passwords. But you will need to change the default password and use a slightly more complicated code for extra security.

Upside Down Pictures

One of the most frustrating installation errors you can make is installing the camera upside down. This usually happens with rotatable wireless security cameras. Somehow, things end up upside down.

Fortunately, you can fix the problem. The most natural solution might lie in the software you’re using – it might allow you to flip the video stream. But that only works if your software provides the option. A more permanent solution would be to mark the top and down sides with a marker. This will eliminate the problem once and for all.

Of course, you will still have to pay attention to the markings.

Not Setting Up Alerts

Now, the whole purpose behind setting up wireless cameras is to monitor your home or office. The problem with this, however, is that you may not be there to monitor the cameras at all times. If you’re a professional organisation, you can hire people. But that won’t work for homeowners and even small business owners.

So, is there a solution?

Yes. All you have to do is switch on the alerts option. The presence of cameras may be enough to drive away from most criminal elements. But some are a little craftier and more driven. If you’re going to protect your home or office, you’ll need to have the alerts switched on.

That way, you can be notified even when you’re away. So, you’ll be able to call the authorities in time and can contact anyone inside your home & office to alert them of the impending threat.

So, there you have it – 6 common mistakes made when installing wireless CCTV cameras. Hopefully, there is enough information here to guide you with the installation process.